Model

TL1800-S

TL1800-I

TL1800-II

Power

3KW

   5.5KW

   5.5KW

 Tube size（OD）(mm)

60*800

60*1000

80*1000

Two furnace plugs are placed on each side to block the thermal radiation from the center of the furnace tube and must be placed in the correct position of the furnace before heating

Dimensions

1000*600*900

1200*600*900

1200*600*900

Supply voltage

                                                   220V

Phase

                                            single phase

heating element

                    Kanthal Super 1900 type MoSi2 heating element

Temperature control

type

  3504 Temperature Instrument

（UK Eurotherm），

1: High-precision temperature meter, LCD liquid crystal display, 5-digit numerical display, simple configuration through quick setting, and C / F unit switching.

2: 50 groups of programs with 500 steps, power off or shutdown, restart the program can be set to start the program from the power off or starting point, and also has the functions of running, pause, skip, stop, reset, etc.

3: Standard 3 groups of PID parameters (optional 8 groups of PID parameters), with built-in PID self-tuning function.

4: Math / logic operation, timer function, alarm function, do math and logic operation function, such as automatic / manual switching of sensor and infrared sensor, high temperature furnace logic control function, and related alarm strategies and functions.

5: Recipe function, different products can call different parameters

6: Customer-defined screen function, displaying current value, set value, output%, program running status and time, etc.

7: Support various communication interfaces Modbus, Ethernet, Profibus, Devicenet, can be integrated with any PLC or higher-level system

8: OEM password function

9: Multilingual support (English, French, German, Spain, Italy)

10: PC version of iTools graphical configuration software, easy to configure, monitor and debug 

 Eurotherm

·        Furnace material

Alsai 1900 imported fiber furnace

Valves and flanges 

control accuracy

                                     +/- 1℃

trigger

Phase-shift triggering (with soft start and current limit)

Current limiting function: Regardless of how to adjust the heating time, the secondary current of our electric furnace after passing through the transformer is limited to 160A, which protects the equipment to a limited extent. No matter how you operate, the equipment will not burn out.

Soft-start function: The current will gradually increase when starting up, and the impact on the heating element is small, which is beneficial to the extension of the heating element life.

Electric appliance

                                             Zhejiang chint

silicon controlled

                                        106/16E SEMIKRON

Maximum temperature

                                                    1800℃

rated temperature

                                                    1750℃

heating rate

                        ≤20℃/ Min(can be modified as required)

Recommended heating rate

                                                 ≤10  ℃/ Min

Thermocouple Type

                            PtRh40-PtRh20    Measuring Range（0-1870℃）

Heating length

160mm

300mm

300mm

Temperature calibration (optional)

The accuracy and uniformity of furnace temperature can be maintained by calibrating tube furnace temperature regularly. You can choose a simple calibration kit from our company to assist you in this task. The complete calibration kit includes standard thermocouples, temperature calibrators, and compensation wires

Ambient surface temperature

                                                        ≤45℃