Battery Electrode Intermittent Coating Machine For Production Line

Transfer  interval  coating  machine,the coating thickness is easy to adjust,more accuracy,easy to operate.it can do both continuous coating and interval coating.

Specifications

Model	TMAX-ITM
Power	3PH  380V,50HZ,
Suitable system	LiFePO, lithium cobalt oxide,Lithium manganese oxide system and coating process of battery anode and cathode
Operating material thickness	Al foil: 10~30um     Cu foil: 7~30um
The design of the roll surface width	300mm
Guaranteed coating width	50~280mm
Mechanical running speed of equipment	7m/min
Coating speed	1-7m/min(Depending on the drying condition)
Suitable for slurry viscosity	2000~16000 Cps
Single coating thickness range	50-150μm
Minimum interval length	5mm
Multi section minimum coating length	20mm
Solvent properties	Oiliness solvent NMP(s.g=1.033,b.p=204℃)
	Water solvent H2O/NMP(s.g=1.000,b.p=100℃)
Suitable solid content	Anode S.C. 60%±20%
	Cathode S.C. 60%±20%(PVDF system) S.C. 50%±5%(SBR system)
specific gravity	Anode  1.5—2.59/cm2 Cathode  1~1.89/cm2
Coating method	Double sides 3 sections, unequal intermittent transfer coating / second sides automatic tracking / continuous transfer coating
Base material running direction	Forward coating ,The base material empty foil movement Positive, reverse.
Control pressure	0 ~ 50N
Rectify deviation	EPC control,stroke 80mm
Oven length	12m
Material quality	SUS304 stainless steel,Inner tank 1.0mm,outside tank 1.2mm
Warranty	One year limited warranty with lifetime support

1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.